184_notes:defining_current

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
184_notes:defining_current [2021/02/23 20:31] – [Conventional Current] bartonmo184_notes:defining_current [2021/02/23 20:31] (current) – [Conventional Current] bartonmo
Line 27: Line 27:
 Conventional current is then defined as the amount of charge to pass a point per second (rather than the number of electrons). Because we already know the number of electrons passing a location, we can find the amount of charge per second simply by multiplying the electron current by the magnitude of the charge of a single electron. If the charge carriers aren't electrons (e.g., some kind of ion), then you will need to use the charge of the charge carrier. In the context of most circuits though, the electrons are almost always the charge that is moving. We will use an upper-case "I" to represent the conventional current and to distinguish it from the electron current. Conventional current is then defined as the amount of charge to pass a point per second (rather than the number of electrons). Because we already know the number of electrons passing a location, we can find the amount of charge per second simply by multiplying the electron current by the magnitude of the charge of a single electron. If the charge carriers aren't electrons (e.g., some kind of ion), then you will need to use the charge of the charge carrier. In the context of most circuits though, the electrons are almost always the charge that is moving. We will use an upper-case "I" to represent the conventional current and to distinguish it from the electron current.
 I=#Coulombssecond=|q|i  I=#Coulombssecond=|q|i 
-The conventional current is now positive (number of electrons times the magnitude of the charge). By "convention", the conventional current flows in the opposite direction of the electron current. In other words, **the conventional current will flow in the //same// direction as the electric field.** The units of conventional current are $\frac{Coulombs}{second}=\frac{C}{s}=**A$, which we call an Ampere or an Amp** for short. It is this conventional current that we measure with ammeters and multimeters in the laboratory.+The conventional current is now positive (number of electrons times the magnitude of the charge). By "convention", the conventional current flows in the opposite direction of the electron current. In other words, **the conventional current will flow in the //same// direction as the electric field.** The units of conventional current are Coulombssecond=Cs=A, which we call an **Ampere or an Amp** for short. It is this conventional current that we measure with ammeters and multimeters in the laboratory.
  
 For historical reasons, much of what we work with in circuits is based off of conventional current rather than the electron current (much of what we know was established before we discovered it was the electrons that were free to move; you can thank [[https://en.wikipedia.org/wiki/Benjamin_Franklin#Electricity|Ben Franklin]] for that). However, remember that physically, the electrons are what move in a circuit. For historical reasons, much of what we work with in circuits is based off of conventional current rather than the electron current (much of what we know was established before we discovered it was the electrons that were free to move; you can thank [[https://en.wikipedia.org/wiki/Benjamin_Franklin#Electricity|Ben Franklin]] for that). However, remember that physically, the electrons are what move in a circuit.
  
  
  • 184_notes/defining_current.1614112281.txt.gz
  • Last modified: 2021/02/23 20:31
  • by bartonmo