Differences

This shows you the differences between two versions of the page.

--- 184_notes:examples:week4_two_segments [2017/09/13 00:38] – [Solution] tallpaul
+++ 184_notes:examples:week4_two_segments [2021/05/25 14:28] (current) – schram45
@@ Line 1: / Line 1: @@
+[[184_notes:dq|Return to $dQ$]]
 ===== Example: Two Segments of Charge =====
 Suppose we have two segments of uniformly distributed charge, one with total charge $+Q$, the other with $-Q$. The two segments each have length $L$, and lie crossed at their endpoints in the $xy$-plane. The segment with charge $+Q$ lies along the $y$-axis, and the segment with charge $-Q$ lies along the $x$-axis. See below for a diagram of the situation. Create an expression for the electric field $\vec{E}_P$ at a point $P$ that is located at $\vec{r}_P=r_x\hat{x}+r_y\hat{y}$. You don't have to evaluate integrals in the expression.
-{{ 184_notes:4_two_segments.png?350 |Axes with Two Segments}}
 ===Facts===
@@ Line 8: / Line 8: @@
   * The other segment lies on the $x$-axis stretching from $0$ to $L$, with charge $-Q$ uniformly distributed.
   * The point $P$ is at the arbitrary location $\vec{r}_P=r_x\hat{x}+r_y\hat{y}$
+  * The electric field due to a point charge is $$\vec{E} = \frac{1}{4\pi\epsilon_0}\frac{q}{r^3}\vec{r}$$
+  * The electric field at $P$ is the superposition of contributions from the two segments: $$\vec{E}_P = \vec{E}_{+Q} +\vec{E}_{-Q}$$
-===Lacking===
+===Goal===
-  * $\vec{E}_P$
+  * Find $\vec{E}_P$.
-===Approximations & Assumptions===
-  * The thicknesses of both segments are infinitesimally small, and we can approximate them as line segments.
-  * $\vec{E}_P$ is made up of contributions from the line segments and nothing else.
 ===Representations===
-  * We represent the situation using the diagram shown in the example statement.
+{{ 184_notes:4_two_segments.png?350 |Axes with Two Segments}}
-  * We represent the electric field due to a point charge as $$\vec{E} = \frac{1}{4\pi\epsilon_0}\frac{q}{r^3}\vec{r}$$
-  * We represent the electric field at $P$ as the sum of contributions from the two segments: $$\vec{E}_P = \vec{E}_{+Q} +\vec{E}_{-Q}$$
 ====Solution====
-Because we know that electric fields add through superposition, we can treat of the charges separately, find the electric field, then add the fields together at $P$ at the end. We can begin with the electric field due to the segment along the $y$-axis. We start by finding $\text{d}Q$ and $\vec{r}$. The charge is uniformly distributed so we have a simple line charge density of $\lambda=Q/L$. The segment extends in the $y$-direction, so we have $\text{d}l=\text{d}y$. This gives us $\text{d}Q$: $$\text{d}Q=\lambda\text{d}l=\frac{Q\text{d}y}{L}$$
+<WRAP TIP>
+=== Approximation ===
+We begin with an approximation, which will make our calculations simpler, and makes sense based on our representation:
+  * The thicknesses of both segments are infinitesimally small, and we can approximate them as line segments.
+</WRAP>
+This example is complicated enough that it's worthwhile to make a plan.
+<WRAP TIP>
+=== Plan ===
+We will use integration to find the electric field from each segment, and then add the electric fields together using superposition. We'll go through the following steps.
+  * For the first segment, find the linear charge density, $\lambda$.
+  * Use $\lambda$ to write an expression for $\text{d}Q$.
+  * Assign a variable location to the $\text{d}Q$ piece, and then use that location to find the separation vector, $\vec{r}$.
+  * Write an expression for $\text{d}\vec{E}$.
+  * Figure out the bounds of the integral, and integrate to find electric field at $P$.
+  * Repeat the above steps for the other segment of charge.
+  * Add the two fields together to find the total electric field at $P$.
+</WRAP>
+Because we know that electric fields add through superposition, we can treat each of the charges separately, find the electric field, then add the fields together at $P$ at the end. We can begin with the electric field due to the segment along the $y$-axis. We start by finding $\text{d}Q$ and $\vec{r}$. The charge is uniformly distributed so we have a simple line charge density of $\lambda=Q/L$. The segment extends in the $y$-direction, so we have $\text{d}l=\text{d}y$. This gives us $\text{d}Q$: $$\text{d}Q=\lambda\text{d}l=\frac{Q\text{d}y}{L}$$
+<WRAP TIP>
+===Assumption===
+The charge is evenly distributed along each segment of charge. This allows each little piece of charge to have the same value along each line.
+</WRAP>
 {{ 184_notes:4_two_segments_pos_dq.png?450 |dQ for Segment on y-axis}}
-The separation vector $\vec{r}$ points from the source of the electric field to the observation point. The source is $\text{d}Q$, which is located at $y\hat{y}$, and the observation point is $\vec{r}_P=r_x\hat{x}+r_y\hat{y}$. Then we have the separation vector: $$\vec{r}=r_x\hat{x}+r_y\hat{y}-y\hat{y}=r_x\hat{x}+(r_y-y)\hat{y}$$
+The separation vector $\vec{r}$ points from the source of the electric field to the observation point. The source is $\text{d}Q$, which is located at $y\hat{y}$, and the observation point is $\vec{r}_P=r_x\hat{x}+r_y\hat{y}$. Then we have the separation vector: $$\vec{r}=\vec{r}_P-y\hat{y}=r_x\hat{x}+r_y\hat{y}-y\hat{y}=r_x\hat{x}+(r_y-y)\hat{y}$$
 Now, we have enough to define the electric field from the small piece ($\text{d}Q$) of the segment - plugging the $\text{d}Q$ and $\vec{r}$ we just found: $$\text{d}\vec{E}=\frac{1}{4\pi\epsilon_0}\frac{\text{d}Q}{r^3}\vec{r}=\frac{1}{4\pi\epsilon_0}\frac{Q\text{d}y}{L\cdot|r_x\hat{x}+(r_y-y)\hat{y}|^3}(r_x\hat{x}+(r_y-y)\hat{y})$$
 Next, we integrate over the entire segment to find an expression for its contribution to the electric field vector at $P$. The limits of our integral are based on the variable of integration, which is $y$. This denotes the length along the segment on the $y$-axis, which stretches from $0$ to $L$, so these are our limits of integration.
-$$\vec{E}_{+Q}=\int_0^L\frac{1}{4\pi\epsilon_0}\frac{Q\text{d}y}{L\cdot|\vec{r}_P-y\hat{y}|^3}(\vec{r}_P-y\hat{y})$$
+$$\vec{E}_{+Q}=\int_0^L\frac{1}{4\pi\epsilon_0}\frac{Q\text{d}y}{L\cdot|r_x\hat{x}+(r_y-y)\hat{y}|^3}(r_x\hat{x}+(r_y-y)\hat{y})$$
 Next, we can do a similar analysis to find the electric field vector contribution from the segment that lies along the $x$-axis. See below for a visual of $\text{d}Q$ and $\vec{r}$. See if you can convince yourself that for the segment along the $x$-axis, $\text{d}Q=\frac{-Q\text{d}x}{L}$, and $\vec{r}=(r_x-x)\hat{x}+r_y\hat{y}$.
-{{ 184_notes:4_two_segments_neg_dq.png?450 |dQ for Segment on y-axis}}
+{{ 184_notes:4_two_segments_neg_dq.png?450 |dQ for Segment on x-axis}}
 From here, we can find $\text{d}\vec{E}$: $$\text{d}\vec{E}=\frac{1}{4\pi\epsilon_0}\frac{\text{d}Q}{r^3}\vec{r}=\frac{1}{4\pi\epsilon_0}\frac{-Q\text{d}x}{L\cdot|(r_x-x)\hat{x}+r_y\hat{y}|^3}((r_x-x)\hat{x}+r_y\hat{y})$$
-To find the contribution from the entire segment, we FIXME (integrate over its entirety):
+To find the contribution from the entire segment, we again must determine the endpoints of our integration. Our variable of integration is $x$ this time, which denotes the distance along the segment that lies on the $x$-axis. This distance stretches from $0$ to $L$, so these are our limits of integration:
-$$\vec{E}_{-Q}=\int_0^L\frac{1}{4\pi\epsilon_0}\frac{-Q\text{d}x}{L\cdot|\vec{r}_P-x\hat{x}|^3}(\vec{r}_P-x\hat{x})$$
+$$\vec{E}_{-Q}=\int_0^L\frac{1}{4\pi\epsilon_0}\frac{-Q\text{d}x}{L\cdot|(r_x-x)\hat{x}+r_y\hat{y}|^3}((r_x-x)\hat{x}+r_y\hat{y})$$
-Then the final electric field vector at $P$ is the sum of the two contributions because of superpostion. (You can pull out the constants to simplify the integral if you want.)
+Then the final electric field vector at $P$ is the sum of the two contributions, because of vector superposition. (You can pull out the constants to simplify the integral if you want.)
 \begin{align*}
 \vec{E} &= \vec{E}_{+Q}+\vec{E}_{-Q} \\
-        &= \int_0^L\frac{1}{4\pi\epsilon_0}\frac{Q\text{d}y}{L\cdot|\vec{r}_P-y\hat{y}|^3}(\vec{r}_P-y\hat{y}) + \int_0^L\frac{1}{4\pi\epsilon_0}\frac{-Q\text{d}x}{L\cdot|\vec{r}_P-x\hat{x}|^3}(\vec{r}_P-x\hat{x}) \\
+        &= \int_0^L\frac{1}{4\pi\epsilon_0}\frac{Q\text{d}y}{L\cdot|r_x\hat{x}+(r_y-y)\hat{y}|^3}(r_x\hat{x}+(r_y-y)\hat{y}) + \int_0^L\frac{1}{4\pi\epsilon_0}\frac{-Q\text{d}x}{L\cdot|(r_x-x)\hat{x}+r_y\hat{y}|^3}((r_x-x)\hat{x}+r_y\hat{y}) \\
-        &= \frac{Q}{4\pi\epsilon_0L}\left(\int_0^L\frac{\text{d}y}{|\vec{r}_P-y\hat{y}|^3}(\vec{r}_P-y\hat{y}) - \int_0^L\frac{\text{d}x}{|\vec{r}_P-x\hat{x}|^3}(\vec{r}_P-x\hat{x})\right) \\
+        &= \frac{Q}{4\pi\epsilon_0L}\left(\int_0^L\frac{\text{d}y}{|r_x\hat{x}+(r_y-y)\hat{y}|^3}(r_x\hat{x}+(r_y-y)\hat{y}) - \int_0^L\frac{\text{d}x}{|(r_x-x)\hat{x}+r_y\hat{y}|^3}((r_x-x)\hat{x}+r_y\hat{y})\right) \\
 \end{align*}
 At this point we have the integrals set up, which you could solve by hand if you so desire or plug them into Wolfram Alpha, Mathematica, or some other computation program.