Table of Contents

Example: Statics

imag0334.jpg If a sign were hung like the one above, what would be the tension forces acting on both of the ropes?

Setup

To solve for the force of tension in both rope 1 and 2, both forces have to broken down into their x and y components, and then solve the resulting system of equations.

Facts

Lacking

Approximations & Assumptions

Representations

Solution

We assume the net force is zero, so Fnet=F=Fx+Fy=0.

To find the forces acting the the x direction, we have to decompose the tension of both ropes. For rope 1, T1,x=T1sinα
For rope 2, T2,x=T2sinβ.
One important note is since the force of tension of the two ropes point in opposite directions, their signs must be different. As convention, the force pointing to the left will be negative in these calculations. Now we know the net force in the x direction Fx=T2sinβT1sinα=0.
Next, we will use the same technique to decompose the forces in the y direction. For rope one, T1,y=T1cosα
For rope 2, T2,y=T2cosβ.
When finding the net force in the y direction, we cannot forget our assumption that gravity also works in the y direction but in the opposite direction as our tension forces. The net force in the y direction is, Fy=T1cosα+T2cosβMg=0.
Now we have two unknowns (the tension of the two ropes) and two equations, so we can solve this as a system of equations. The force of tension in the x direction can be rearranged to solve for one of the unknowns, in this case T1 T2sinβT1sinα=0
T1=T2sinβsinα
Now we can plug this solution for T1 into the equation we have for the tension force in the y direction T1cosα+T2cosβMg=0
T2sinβsinαcosα+T2cosβMg=0
And solve for T2 (should I add more steps?) T2=Mg(sinβtanα+cosβ)

Now we have solutions for both tension forces, T1 and T2