183_notes:constantf

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
183_notes:constantf [2022/01/17 17:51] – pwirving183_notes:constantf [2023/01/13 19:59] (current) – hallstein
Line 49: Line 49:
  
 From this equation, you can determine the arithmetic average velocity, which in this case is equal to the average velocity. From this equation, you can determine the arithmetic average velocity, which in this case is equal to the average velocity.
- +$$v_{avg,x} = \dfrac{v_{ix} + v_{fx}}{2} = \dfrac{ v_{ix} + v_{ix} + \dfrac{F_{net,x}}{m} \Delta t}{2} 
-$$v_{avg,x} = \dfrac{v_{xi} + v_{xf}}{2} = \dfrac{ v_{xi} + v_{ix} + \dfrac{F_{net,x}}{m} \Delta t}{2} + = \dfrac{2v_{ix}}{2}+ \dfrac{\dfrac{F_{net,x}}{m} \Delta t}{2} = v_{ix}+ \dfrac{1}{2}\dfrac{F_{net,x}}{m} \Delta t $$
- = \dfrac{2v_{xi}}{2}+ \dfrac{\dfrac{F_{net,x}}{m} \Delta t}{2} = v_{xi}+ \dfrac{1}{2}\dfrac{F_{net,x}}{m} \Delta t $$+
  
 By using this average velocity in the [[183_notes:displacement_and_velocity|position update formula]], you obtain the final expression that predicts the location of the system given only information about its //initial position, velocity, and the force acting on it.//  By using this average velocity in the [[183_notes:displacement_and_velocity|position update formula]], you obtain the final expression that predicts the location of the system given only information about its //initial position, velocity, and the force acting on it.// 
  
-$$x_{f} = x_{i} + v_{avg,x} \Delta t = x_{i} + v_{xi} \Delta t + \dfrac{1}{2}\dfrac{F_{net,x}}{m} \Delta t^2$$+$$x_{f} = x_{i} + v_{avg,x} \Delta t = x_{i} + v_{ix} \Delta t + \dfrac{1}{2}\dfrac{F_{net,x}}{m} \Delta t^2$$
  
 In physics, the information about the system prior to predicting its motion is called the "initial state" of the system. The starting values of these properties (position, velocity, net force) are called the "initial conditions" of the system. In physics, the information about the system prior to predicting its motion is called the "initial state" of the system. The starting values of these properties (position, velocity, net force) are called the "initial conditions" of the system.
 +
  
 \\ \\
 +
 +
  
 ==== Connection to Energy ==== ==== Connection to Energy ====
Line 72: Line 74:
  
 \\ \\
 +==== Summary of Constant Force  ====
 +
 +The relationship between force and acceleration (even for a variable net force): $\vec{F}_{net}=m\vec{a}$ OR $\vec{a}=\frac{\vec{F}_{net}}{m}$.
 +
 +The following 1D equations are valid ONLY if the net force (and therefore, the acceleration) is constant.  These equations are commonly known as kinematic equations:
 +$$x_{f} = x_{i} + v_{avg,x} \Delta t$$
 +$$v_{fx} = v_{ix} + \dfrac{F_{net,x}}{m} \Delta t$$
 +$$v_{avg,x} = \dfrac{v_{ix} + v_{fx}}{2} = v_{ix}+ \dfrac{1}{2}\dfrac{F_{net,x}}{m} \Delta t $$
 +$$x_{f} =  x_{i} + v_{ix} \Delta t + \dfrac{1}{2}\dfrac{F_{net,x}}{m} \Delta t^2$$
 +$$v_{xf}^2 = v_{xi}^2 + 2\dfrac{F_{net,x}}{m}\Delta x$$ 
 +
 +\\
 +
 ==== Constant Force in 3D ==== ==== Constant Force in 3D ====
  
  • 183_notes/constantf.1642441919.txt.gz
  • Last modified: 2022/01/17 17:51
  • by pwirving