This is an old revision of the document!
Project 5: Part A: Escape from Korath Part 2
Project 5: Learning issues
- Constant acceleration and kinematic equations
- Frictional Force
- Rotated Frames (Forces on an inclined plane)
- Free body diagrams
Your team has navigated to the bottom of the cliff successfully but are confronted by an incline followed by a tunnel that then leads to the dimensional gate. Your amazing piece of tech (turning out to be very useful) indicates that the dimensional gate is at the end of the tunnel and must be entered at a speed of 20mph. It also indicates the angle and height of the incline and the length of the tunnel as displayed in the following screenshot from your tech. The tech also indicates that the base of the tunnel is made of a different surface than that of the incline. Your tech indicates that the incline is made of Leannium and you have conducted previous tests on this material that indicates that a sled can rest on an incline of the material without sliding as long as the angle of the incline is less than or equal to 14ยบ. At the top of the incline are two sleds. You have one chance of escape, for all four of your group members to push the sled down the incline and get in, move through the tunnel and then the dimensional gate. Will you be successful?
