184_notes:loop

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
184_notes:loop [2018/08/07 13:04] – [What is the shape of the magnetic field?] curdemma184_notes:loop [2022/04/04 12:46] (current) hallstein
Line 1: Line 1:
 Section 21.6 in Matter and Interactions (4th edition) Section 21.6 in Matter and Interactions (4th edition)
  
-[[184_notes:i_thru|Next Page: Current through a Loop]]+/*[[184_notes:i_thru|Next Page: Current through a Loop]]
  
-[[184_notes:motiv_amp_law|Previous page: Motivating Ampere's Law]]+[[184_notes:motiv_amp_law|Previous page: Motivating Ampere's Law]]*/
  
-===== Magnetic field due to wire =====+===== Magnetic field along closed loop =====
  
-For the purpose of our explanation, we will use a long straight wire with a current $I$ running through it as our example. We'll start by talking about a thin wire and eventually build up to talking about a thick wire. In this class, we will also make the typical //__assumption that the current in the wire is uniform and in a steady state__// (upper-division courses may address non-uniform currents). That is, at every point in the wire the same amount of charge per unit time exists. +For the context of our explanation, we will use a long straight wire with a current $I$ running through it as our example. We'll start by talking about a thin wire and eventually build up to talking about a thick wire. In this class, we will also make the typical //__assumption that the current in the wire is uniform and in a steady state__// (upper-division courses may address non-uniform currents). That is, at every point in the wire the same amount of charge per unit time exists. 
  
 ==== What is the "shape" of the magnetic field? ==== ==== What is the "shape" of the magnetic field? ====
-Since we already calculated the B-field from a long straight wire using the [[184_notes:b_current|Biot-Savart law]] (by adding up all the contributions), we already have some insight into to what we think the magnetic field should be from the wire - it should curl around the wire. (We will eventually use the Biot-Savart result at the end to verify what we find using Ampere's Law.) As with the [[184_notes:gauss_motive|electric field and what you'll see next week with Gauss' Law]], the structure, shape, and symmetry of the magnetic field is very important to understanding how to use Ampere'Law.+Since we already calculated the B-field from a long straight wire using the [[184_notes:b_current|Biot-Savart law]] (by adding up all the contributions), we already have some insight into to what we think the magnetic field should be from the wire - it should curl around the wire. (We will eventually use the Biot-Savart result at the end to verify what we find using Ampere's Law.) For Ampere'Law, the structure, shape, and symmetry of the magnetic field is very important to understanding how to set up the different parts of the equation. **This means that the first step in Ampere'law is to draw the magnetic field.**
  
 === Magnetic field circulates around moving charges === === Magnetic field circulates around moving charges ===
  
-As you have seen, the [[184_notes:moving_q|magnetic field circulates around a moving charge]]. Below is a simulation that shows this for a series of moving point charges.+As you have seen before, the [[184_notes:moving_q|magnetic field circulates around a moving charge]]. Below is a simulation that shows this for a series of moving point charges.
  
-{{url>http://web.pa.msu.edu/people/caballero/teaching/simulations/MagneticFieldCirculation.html 675px,425px|Charges moving along a line}}+{{url>https://web.pa.msu.edu/people/caballero/teaching/simulations/MagneticFieldCirculation.html 675px,425px|Charges moving along a line}}
  
-As you can see, the sizes of the magnetic field vectors (the arrows) get larger as the charges get closer to the observation locations and get smaller as they pass and move away. The direction of the magnetic field is always around the path of the charges. Now, imagine a constant stream of particles very close together, that is, a current of many electrons moving in a wire. In that case, the direction of the magnetic field is still around the wire, but the magnitude stays constant. That is, for a steady current, the magnetic field at any one point is a constant in time. Furthermore, for cylindrical wires (the ones we will focus on), the magnitude of magnetic field is constant for a given distance from the wire. You saw this with the long wire when we solved the problem using Biot-Savart. +As you can see, the sizes of the magnetic field vectors (the arrows) get larger as the charges get closer to the observation locations and get smaller as they pass and move away. The direction of the magnetic field is always around the path of the charges. Now, imagine a constant stream of particles very close together, that is, a current of many electrons moving in a wire. In that case, the direction of the magnetic field is still around the wire, but the magnitude stays constant. That is, **for a steady current, the magnetic field at any one point is a constant in time**. Furthermore, **for cylindrical wires (the ones we will focus on), the magnitude of magnetic field is constant for a given distance from the wire**. You saw this with the long wire when we solved the problem using Biot-Savart. 
  
 === Symmetry is critical === === Symmetry is critical ===
  
-The structure (or symmetry) of this field is very useful for Ampere's Law. That is, the fact that the B-field always circulates around the wire and is the same magnitude for a given distance makes this problem of a steady state line of charge an excellent candidate for using Ampere's Law. In fact, this symmetry holds inside the wire as well. That is, there will be a constant magnitude magnetic field circulating around every point inside the wire as well! This is a really important result that we can explore with Ampere's Law, but that can be a real challenge to deal with using [[184_notes:b_current|Biot-Savart]].+The structure (or symmetry) of this field is very useful for Ampere's Law. That is, the fact that the B-field always circulates around the wire and is the same magnitude for a given distance makes this problem of a steady state current an excellent candidate for using Ampere's Law. //In fact, this symmetry holds inside the wire as well//. That is, there will be a constant magnitude magnetic field circulating around every point inside the wire as well! This is a really important result that we can explore with Ampere's Law, but that can be a real challenge to deal with using [[184_notes:b_current|Biot-Savart]].
  
 We'll start by thinking about the magnetic field outside a wire and the mathematical representation Ampere's Law: We'll start by thinking about the magnetic field outside a wire and the mathematical representation Ampere's Law:
Line 28: Line 28:
 $$\oint \vec{B} \bullet d\vec{l} = \mu_0 I_{enc}$$ $$\oint \vec{B} \bullet d\vec{l} = \mu_0 I_{enc}$$
  
-The first thing we will consider will be the shape of the magnetic field for the situation - which is related to the left-hand side of Ampere's Law - namely the $\oint \vec{B} \bullet d\vec{l}$ part.+Again, the first thing we will consider will be the shape of the magnetic field for the situation - which is related to the left-hand side of Ampere's Law - namely the $\oint \vec{B} \bullet d\vec{l}$ part.
  
 {{youtube>XkUeIV31cKs?large}} {{youtube>XkUeIV31cKs?large}}
Line 34: Line 34:
 ==== What is $\vec{B}\bullet d\vec{l}$? ==== ==== What is $\vec{B}\bullet d\vec{l}$? ====
  
-You have seen these kinds of dot products before, i.e., when we defined [[184_notes:pc_potential|electric potential]]. But in the case of electric potential, we understood this to be a measure work per unit charge. In the case of the magnetic field there is no such analog. That integral of the magnetic field along a path is not the considered "work". As you saw before, the [[184_notes:q_path|magnetic force]] has important properties that make it such that the magnetic field cannot do work. So what is this $\vec{B}\bullet d\vec{l}$ thing?+You have seen these kinds of dot products before when we defined [[184_notes:pc_potential|electric potential]]. But in the case of electric potential, we understood this to be a measure of work per unit charge. In the case of the magnetic fieldthere is no such analog. **That integral of the magnetic field along a path is not the considered "work"**. As you saw before, the [[184_notes:q_path|magnetic force]] has important properties that make it such that the magnetic field cannot do work. So what is this $\vec{B}\bullet d\vec{l}$ thing?
  
 This integral formulation comes from the [[https://en.wikipedia.org/wiki/Maxwell%27s_equations|mathematical model]] that the magnetic field seems to obey in every instance we observe it. Namely, how much the magnetic field curls around the wire depends on how much current there is creating the magnetic field. This measure, which is beyond the scope of this course, called the [[https://en.wikipedia.org/wiki/Maxwell%27s_equations#Amp.C3.A8re.27s_law_with_Maxwell.27s_addition|curl of the magnetic field]] is an important property of the field and is an essential quality of what distinguishes it from the electric field (a single //__stationary__// charge has an E-field that points away or towards the charge - it cannot be curly). This integral formulation comes from the [[https://en.wikipedia.org/wiki/Maxwell%27s_equations|mathematical model]] that the magnetic field seems to obey in every instance we observe it. Namely, how much the magnetic field curls around the wire depends on how much current there is creating the magnetic field. This measure, which is beyond the scope of this course, called the [[https://en.wikipedia.org/wiki/Maxwell%27s_equations#Amp.C3.A8re.27s_law_with_Maxwell.27s_addition|curl of the magnetic field]] is an important property of the field and is an essential quality of what distinguishes it from the electric field (a single //__stationary__// charge has an E-field that points away or towards the charge - it cannot be curly).
  
-So think of $\vec{B}\bullet d\vec{l}$ as the little measure of how much the magnetic field curls around its source (the current). Our job is to add up all those little contributions to find the curl of the magnetic field at a given distance from the current,+**So think of $\vec{B}\bullet d\vec{l}$ as the little measure of how much the magnetic field curls around its source (the current)**. Our job is to add up all those little contributions along a closed path to find the curl of the magnetic field at a given distance from the current,
  
 $$\oint \vec{B} \bullet d\vec{l}.$$ $$\oint \vec{B} \bullet d\vec{l}.$$
Line 47: Line 47:
 [{{  184_notes:week11_loop_shapes.png?300|Shapes of Amperian Loops}}] [{{  184_notes:week11_loop_shapes.png?300|Shapes of Amperian Loops}}]
  
-Since we get to pick what kind of loop we want, we want to choose a loop that will make our math easy. If we look at the $$\oint \vec{B} \bullet d\vec{l}$$ - there are a couple of steps that will make our calculation MUCH simpler (just like with [[184_notes:eflux_curved|Gauss's Law]])+First, **we want to pick a Amperian loop (or the imaginary path) so that the observation point is somewhere along the path**. For example, if we wanted to find the magnetic field a distance of $R$ away from the wire, we would want to pick a loop that has a radius of $R$ around the wire.  
-  - We want $\vec{B}$ to be parallel to $d\vec{l}$ (because then the dot product turns into multiplication) + 
-  - We want the magnitude of $\vec{B}$ to be constant so we can pull it out of the integral+Then, since we get to pick what kind of loop we want, we want to choose a loop that will make our math easy. If we look at the $$\oint \vec{B} \bullet d\vec{l}$$ - there are a couple of steps that will make our calculation MUCH simpler: 
 +  - **We want $\vec{B}$ to be parallel to $d\vec{l}$ because then the dot product turns into multiplication** $$\oint \vec{B} \bullet d\vec{l} = \oint |\vec{B}||d\vec{l}| $$ 
 +  - **We want the magnitude of $\vec{B}$ to be constant so we can pull it out of the integral** $$\oint |\vec{B}||d\vec{l}| = |\vec{B}| \oint |dl|$$
  
 This means we want to choose a closed loop that: 1) is always following the B-Field (to make $d\vec{l}$ parallel to $\vec{B}$) and 2) has a constant B-Field everywhere around the loop. So if the magnetic field points in circle around the wire, you want to pick a circular loop. If the magnetic field is constant, you want to pick a loop with at least one straight edge (like a rectangular loop). This means we want to choose a closed loop that: 1) is always following the B-Field (to make $d\vec{l}$ parallel to $\vec{B}$) and 2) has a constant B-Field everywhere around the loop. So if the magnetic field points in circle around the wire, you want to pick a circular loop. If the magnetic field is constant, you want to pick a loop with at least one straight edge (like a rectangular loop).
  
-//It's important to note that this loop isn't real//, but rather, it's like the [[184_notes:gauss_ex|Gaussian surface]] that we had before. It's an imagined loop that helps guide our work with Ampere's Law. We refer to this imagined loop as the "Amperian Loop."+**It's important to note that this loop isn't real** - there is not a wire or anything physically around the wire. It's an imagined loop that helps guide our work with Ampere's Law. We refer to this imagined loop as the "Amperian Loop."
  
 [{{  184_notes:week10_3.png?400|Amperian loop around a line of current}}] [{{  184_notes:week10_3.png?400|Amperian loop around a line of current}}]
Line 72: Line 74:
 \end{align*} \end{align*}
  
-where the first two steps listed come from the fact that $\vec{B}$ points in the direction of $d\vec{l}$ everywhere on the loop (so the dot product simplifies to multiplication) and the last two steps listed come from the fact that the B-field is the same magnitude along that loop (so you can pull it out of the integral). The resulting integral of $dl$ gives just $l$, which is the length of the loop or just the circumference of the loop. Since we said that the loop would have a radius R, this means $l=2\pi R$, so we get:+where the first two steps listed come from the fact that $\vec{B}$ points in the direction of $d\vec{l}$ everywhere on the loop (so the dot product simplifies to multiplication) and the last two steps listed come from the fact that the B-field is the same magnitude along that loop (so you can pull it out of the integral). The resulting integral of $dl$ gives just $l$. Because this length comes from the integration of the $dl$, **the length $l$ here represents the length of the Amperian loop**. For our example, the length of the loop would just be the circumference of the loop. Since we said that the loop would have a radius R, this means $l=2\pi R$, so we get:
 $$\oint \vec{B} \bullet d\vec{l} = B(2 \pi R)$$ $$\oint \vec{B} \bullet d\vec{l} = B(2 \pi R)$$
  
 Remember that the $B$ in this equation is the magnitude of the B-field on that loop (so this would be the magnetic field at a distance $R$ away from the straight wire). Remember that the $B$ in this equation is the magnitude of the B-field on that loop (so this would be the magnetic field at a distance $R$ away from the straight wire).
  • 184_notes/loop.1533647055.txt.gz
  • Last modified: 2018/08/07 13:04
  • by curdemma