course_planning:184_projects:f18_project_11

This is an old revision of the document!


The EM-Boar Tigers have been fought back for now but your team needs to get a message out that you all are under attack and need support in order to evacuate the town. Cellular and radio signals have somehow become blocked from an external source which began at the same point you encountered the Em-Boar Tigers in the subway tunnel. However, you know that the military has set-up a perimeter base outside of the storm front and it is within sight of the Hawkion compound where you are positioned. You notice that there is an old-fashioned camera that produces flashes via a capacitor. You decide that you might be able to communicate with the people on the perimeter via morse code and go to the roof to try and send your message.

You measure the capacitor and find that the capacitor plates are 2 cm by 3 cm and separated by a distance of 40 $\mu m$. When hooked up to a battery, the plates become fully charged with $Q = 1.5*10^{-7}C$. The team leader, however, is concerned that the electric field inside the capacitor is going to be too large and cause sparking between the plates and destroy your only chance at getting out a message.

With your team, build a model for the capacitor that allows you to calculate the electric field inside and outside the parallel plates. Make sure you have a diagram of the electric field, a graph of the electric field, and a graph of the electric potential to convince him that the electric field is either safe or unsafe so that you can get out the rescue message.

Learning Goals

  • Use Gauss's Law to calculate the electric field in between two charged parallel plates.
  • Explain why you picked your Gaussian surface and how it helped you simplify your calculations.
  • Describe how the magnitude and direction of the electric field changes both inside and outside the capacitor.
  • Explain the general steps that you take when using Gauss's Law.
  • course_planning/184_projects/f18_project_11.1542128485.txt.gz
  • Last modified: 2018/11/13 17:01
  • by dmcpadden